There are some things which a prospective AB-TEPI operator is required to provide for the system to be installed.

Wayleaves and permissions

It is the users responsibility to obtain all planning and other permissions required for the siting of AB-TEPI street furniture and residual civil works prior to the commencement of the contract.

If it is the users intention that equipment shall be sited in any premises (weather publically owned or otherwise) it shall be the users responsibility to obtain all permissions in writing and agree all costs prior to the commencement of the contract.

If it is the users' intention that cables shall be routed through private land it shall be the users' responsibility to obtain all wayleaves and permissions in writing and agree all costs prior to the commencement of the contract.

Mains electricity power supply

A single phase unmetered 240V 50Hz mains supply and proven earth terminal at all ICS equipment installation locations.

Camera drop cables

The provision of all interconnection cables between the ICS demarcation terminals and the camera and / or camera control equipment.

Control room

Cable containment

The provision of a suitable cable route from the building duct entry point to the equipment rack location with appropriate containment system installed (ducting, cable tray, conduit, cable trunking).

Cabinet space

ICS equipment cabinets normally have a footprint of 600mm x 600mm with heights up to 2200mm. A clear space of 1 metre is required both at the front and rear for access. Actual size and number of cabinets will be agreed at the time of survey.

CCTV system interconnections

The provision of all interconnection cables between the ICS demarcation terminals and the control room CCTV systems and equipment.